This help page shows how to install EasySignage on Sony BRAVIA professional displays using an APK copied to a USB drive.
Requirements
- Sony BRAVIA professional display
- Sony remote control
- USB drive formatted as FAT32
- Latest EasySignage APK copied to the root of the USB drive
- Internet connection
Enable Pro Settings
- Open the Sony Settings menu.
- Go to Pro Settings.
Install EasySignage
Step 1 - Prepare the USB drive
- Download the latest EasySignage APK from Download EasySignage.
- Copy the APK file to the root of a USB drive formatted as FAT32.
Step 2 - Insert the USB drive
- Insert the USB drive into the USB port on the Sony display.
Step 3 - Install the APK
- In Pro Settings, select Install APK.
- Choose the EasySignage APK file from the USB drive.
- Press Install and wait for the installation to finish.
Start EasySignage
- Open the EasySignage app after installation.
- Wait for the screen hash ID to appear.
- Add the screen from your EasySignage management console.
Basic Pro Settings
Use these settings to make EasySignage start cleanly in Sony’s Pro mode.
Step 1 - Open Pro Settings
- Press the HOME button on the remote.
- Open the Settings gear in the top right.
- Select Pro Settings.
Step 2 - Enable EasySignage
- Open Apps in Pro Settings.
- Find EasySignage and select Enable.
Step 3 - Set the input source
- Go back to Pro Settings.
- Open Initial Input Source.
- Select Android App.
- Choose EasySignage from the list of installed apps.
Step 4 - Finish setup
- Confirm with OK.
- Select Start Pro Mode to reboot the display and apply the configuration.
Additional Settings
These settings help keep the display on and recover after power interruptions.
Disable power saving mode
- Press the HOME button on the remote.
- Open the Settings gear in the top right.
- Select Power & Energy.
- Open Idle power off.
- Set it to Off.
Time controlled on and off
- Press the HOME button on the remote.
- Open the Settings gear in the top right.
- Select Pro Settings.
- Open Power Scheduling.
- Set the on and off times you want.
Autostart on power failure
- Press the HOME button on the remote.
- Open the Settings gear in the top right.
- Select Pro Settings.
- Open AC Power On.
- Set it to Always On.
