---
title: "Digital Signage Touch Screen Test | EasySignage"
description: "Tap a digital signage touch screen and see each tap's position and events, to check touch accuracy and find taps that register twice."
url: https://easysignage.com/help/apps/digital-signage-touch-test/
---

# Touch Test App

-   [Open in Claude Ask questions about this page](https://claude.ai/new?q=Read+https%3A%2F%2Feasysignage.com%2Fhelp%2Fapps%2Fdigital-signage-touch-test%2F+so+I+can+ask+questions+about+it.)
-   [Open in ChatGPT Ask questions about this page](https://chatgpt.com/?hints=search&q=Read+https%3A%2F%2Feasysignage.com%2Fhelp%2Fapps%2Fdigital-signage-touch-test%2F+so+I+can+ask+questions+about+it.)

The Touch Test app checks a touch screen. Each tap leaves a dot where the screen detected it, with its position and the events that reached the app. It also warns when one tap reaches apps twice.

The app has no settings. It runs on the screen without an internet connection, in landscape and portrait, and in any layer size.

_Note: The Touch Test app isn’t offered in video wall playlists._

![Touch Test showing two taps, each with its position and the events mousedown, mouseup and click](https://easysignage.com/help/assets/img/apps/touch-test/touch-test-screen.webp)

## When to use it

-   **Setting up a touch screen or kiosk**: tap across the whole screen, including the corners and edges, and check that each dot appears under your finger.
-   **Taps land in the wrong place**: if the dots appear away from your finger, calibrate the touch screen in the device’s settings.
-   **Buttons react twice in an interactive app**: check whether the screen sends each tap as both a touch and a click.
-   **Comparing touch hardware**: run the test on different screens before you choose one for a kiosk.

## Add the Touch Test app

1.  Open the playlist, then click the layer. See [Playlist Media Management](https://easysignage.com/help/playlists/digital-signage-media/).
2.  If the layer is empty, the content apps open. If it already has media, click **Add New**.
3.  Click **Screen tools**, then **Touch Test**. You can also type its name in **Search Apps**. The app has no settings, so it goes straight into the layer.
4.  Click **Publish changes of this playlist** to send it to your screens.

When you finish testing, remove the item from the layer and publish the playlist again.

## What the screen shows

-   **Tap anywhere**: the instruction at the top of the screen.
-   **A dot for each tap**: placed where the screen detected the tap, with its position in pixels and the events in order, such as `touchstart → touchend → mousedown → mouseup → click`. The last 12 taps stay on the screen.
-   **Touch and click: an app must act on only one**: the tap reached the page as a touch and as a click, and the time between them. An app that listens to both acts twice on one tap.
-   **Fired twice**: the same event arrived twice for one tap.

A label near the bottom always says **Test pattern**, with the time and the screen name, so a screen left on the pattern is easy to notice.

The words on the screen use the screen’s own language when it is one of the languages EasySignage supports, and English otherwise.

## Related articles

-   [Player Info App](https://easysignage.com/help/apps/digital-signage-player-info/)
-   [Safe Area Test App](https://easysignage.com/help/apps/digital-signage-safe-area-test/)
-   [Interactive Kiosk App](https://easysignage.com/help/apps/interactive-digital-signage/)

[Previous ##### Safe Area Test App](https://easysignage.com/help/apps/digital-signage-safe-area-test/)

[Next ##### Add Template](https://easysignage.com/help/templates/add-templates/)
