---
title: "LED Wall Calibration Grid for Digital Signage | EasySignage"
description: "Show a numbered, coloured grid on an LED wall to check cabinet order, seams, alignment and brightness uniformity while you set it up."
url: https://easysignage.com/help/apps/digital-signage-led-calibrate/
---

# LED Calibrate App

-   [Open in Claude Ask questions about this page](https://claude.ai/new?q=Read+https%3A%2F%2Feasysignage.com%2Fhelp%2Fapps%2Fdigital-signage-led-calibrate%2F+so+I+can+ask+questions+about+it.)
-   [Open in ChatGPT Ask questions about this page](https://chatgpt.com/?hints=search&q=Read+https%3A%2F%2Feasysignage.com%2Fhelp%2Fapps%2Fdigital-signage-led-calibrate%2F+so+I+can+ask+questions+about+it.)

The LED Calibrate app shows a calibration grid for LED walls: one numbered, coloured cell for each cabinet or module, with 1-pixel lines on every cell edge, diagonal lines from corner to corner, and a centre cross and circle. A cabinet that is in the wrong place, turned, or a pixel out of line shows up as a wrong number, a repeated colour or a broken line.

The top-left corner shows the size of the app’s window in pixels. The app runs on the screen without an internet connection, in any layer size.

_Note: The LED Calibrate app isn’t offered in video wall playlists._

![LED Calibrate showing a 16 by 9 grid of numbered coloured cells with diagonal lines, a centre circle and the window size 1189 × 668 in the top-left corner](https://easysignage.com/help/assets/img/apps/led-calibrate/led-calibrate-grid.webp)

## When to use it

-   **Mapping cabinets**: after you set up the LED controller, check that each cabinet shows the right number in the right place. A swapped cabinet shows a number out of order and a colour that matches its neighbour.
-   **Checking the cabling**: choose **1, 2, 3 snaking like the cable** to number the cells in the order a daisy-chained cable usually runs.
-   **Finding seams and gaps**: the 1-pixel lines on the cell edges show a cabinet that is a pixel out of line, and the diagonals show a step where cabinets don’t meet.
-   **Checking brightness and colour after a repair**: choose **Grey (brightness uniformity)** to spot a replaced module that is brighter, darker or a different tint than its neighbours.
-   **Testing each colour**: choose **Red, green, blue and white** to find a cabinet with a weak colour.
-   **Checking scaling**: compare the window size in the corner with the wall’s resolution, and check that the centre circle is round.

## Add the LED Calibrate app

1.  Open the playlist, then click the layer. See [Playlist Media Management](https://easysignage.com/help/playlists/digital-signage-media/).
2.  If the layer is empty, the content apps open. If it already has media, click **Add New**.
3.  Click **Screen tools**, then **LED Calibrate**. You can also type its name in **Search Apps**.
4.  On the **Grid** page, set **Columns** and **Rows** to the number of cabinets or modules across and down the wall. Click **Next**.
5.  On the **Look** page, choose **Cell colours**, **Cell numbers** and the lines to show. See [Settings](#settings).
6.  Click **Save**.
7.  Click **Publish changes of this playlist** to send it to your screens.

The settings pages work like other apps with setup pages. See [App Setup Pages](https://easysignage.com/help/apps/digital-signage-app-setup/). To change the settings later, click **Edit** next to the item in the layer.

## Settings

**Grid**

-   **Columns**: how many cells across, from 1 to 48. The default is 16.
-   **Rows**: how many cells down, from 1 to 27. The default is 9.

The app splits the layer evenly between the cells. When the layer doesn’t divide evenly, cells differ by at most one pixel.

**Look**

-   **Cell colours**:
    -   **Distinct colours (find swapped cabinets)**: no cell has the same colour as the cell beside, below or diagonal to it.
    -   **Red, green, blue and white**: each cell shows one colour.
    -   **Grey (brightness uniformity)**: every cell is the same grey.
    -   **Black and white checker**: alternating black and white cells, with red lines.
-   **Cell numbers**:
    -   **1, 2, 3 row by row**: numbered left to right, top to bottom.
    -   **1, 2, 3 snaking like the cable**: every other row is numbered right to left.
    -   **A1, A2 (row letter, column)**: a letter for the row and a number for the column.
    -   **1.1, 1.2 (row.column)**: the row and the column.
-   **1-pixel lines on the cell edges**: a line exactly one pixel wide on every cell edge and around the outside.
-   **Diagonal lines corner to corner**: two lines across the whole wall.
-   **Centre cross and circle**: a cross through the centre and a circle that must look round.

Each cell also shows its row and column, such as `R2 C5`, in its bottom-left corner when the cell is large enough.

> **Note:** The grid fills the layer to the very edge, and nothing moves. Remove the app from the playlist when you finish calibrating, so a still image doesn’t stay on the wall for hours.

## Related articles

-   [Colour Test App](https://easysignage.com/help/apps/digital-signage-colour-test/)
-   [Pixel Test App](https://easysignage.com/help/apps/digital-signage-pixel-test/)
-   [Player Info App](https://easysignage.com/help/apps/digital-signage-player-info/)
-   [App Setup Pages](https://easysignage.com/help/apps/digital-signage-app-setup/)

[Previous ##### Player Info App](https://easysignage.com/help/apps/digital-signage-player-info/)

[Next ##### Colour Test App](https://easysignage.com/help/apps/digital-signage-colour-test/)
